Complete CO2 Set with disposable CO2 bottle and night-time switch-off
Content of the Easy 1 Sets
Disposable - gas bottle with stand, filled with 500 g CO2
Precision pressure reducer
CO2 vario diffusion system (aquarium height min. 30 cm)
Safety valve
Connecting hose 4/6 mm
CO2 /pH permanent test
Additionally included in Easy 2 Set:
Safety magnet valve 12 V with plug-type power supply.
Product description
The JBL Easy 1 and Easy 2 CO2 SETS provide aquatic plants with the vital
nutrient, CO2, easily and conveniently creating the ideal conditions for a
luxuriant underwater garden. At the same time, by regulating the supply of CO2
the pH level can be adjusted to around 7, the range best suited to the majority
of fish and plants. An easily operated precision pressure regulator with pre-set
operating pressure (1 – 1.5 bar) enables precise dosages to be made. The new CO2
vario diffusion system can be adapted to fit any aquarium height using extension
sets (available in specialist aquarium stores). A stock of 500 g of CO2 should
last a long time, without changing the gas bottle. With the convenient
disposable CO2 bottles you are independent of the refill service for re-usable
bottles.
Tip: We recommend keeping a new disposable bottle in reserve, in case the CO2
should run out at the weekend. Installation
Technical data:
CO2 disposable bottle 500 g
Corresponding to TRG 303
TÜV test number:
Contents max.: 500 g CO2
Weight empty: 1070 g
Vol.: 930 ml
Pressure: 36 bar at 0°C
Self-closing bottle valve, thread 10 X 1
Easy Pressure Reducer :
Pre-set operating pressure approx.. 1 – 1.5 bar
Connection for hose 4/6 mm
Needle valve with stainless steel spindle and fine thread
Excess-pressure valve, self-closing
Note: The JBL Easy Pressure Reducer has been specially designed for use with JBL
Disposable CO2 bottles and must be used with these bottles only. The pressure
reducer must not be used with refillable bottles via an adapter.
Easy Magnetic Valve (only in Easy 2 Set):
Function: off-circuit connection
Operating voltage: 12 V DC
Continuity: 1.5 mm
Pressure: max. 3 bar
Power input: 1.5 VA
Plug-in power supply unit: primary 240 V, 50 Hz, secondary 12 V DC; 0.15 A
|
